News
Announcement: Ohio Aero Labs is now Avcraft
Posted by Tim Cochrane on
Ohio Aero Labs is now AvCraft!
Custom Project: Cessna 185 Yoke Emblems
Posted by Tim Cochrane on
From time to time we do custom projects. Here are some Cessna 185 yoke emblems. These are what they looked like when they came in: We had a local chrome shop re-chrome the cast zinc badges. We re-produced the decals using similar materials as the original.
New Product: Piper Cub Clear Inspection Covers
Posted by Tim Cochrane on
We have added clear inspection panels to our product offering. These are made out of high impact 1/16" thick acrylic. They are are fabricated using precision CNC cutting. All dimensions have been taken from original piper drawings. Piper Clear Inspection Panel Kit
New Product: Piper Exterior Grommets
Posted by Hulk Code on
Peeling Reinforcement Grommets... Maybe you have this problem too. Solution: Custom CNC cut grommets. WIth ADHESIVE! No contact cement required! No mess! Did I mention CNC cut? AC60841 Piper 60841 AC60863-2 Piper 60863-2 AC60863-3 Piper 60863-3 AC60863-5 Piper 60863-5 AC60863-9 Piper 60863-9 AC60863-11 Piper 60863-11
New Product: PA-18 Intake Dome Washer
Posted by Tim Cochrane on
The dome which holds the filter on our PA-18 Super Cub had a wallowed hole in it. As the engine vibrates, the hole on this part becomes out of round and just continues to wear. The spinner dome is around .050" thick or so and rides on a 1/4" bolt. If we take the standard clearance of a 1/4" hole that gives a bearing area of around .022 square inches - not much. They wear quick, especially since the bolt is steel and the intake dome is 3003 aluminum. The first "prototype" was a washer that I bolted down and...